Mask nose wire manufacturers remind you to use medical disposable masks correctly
Choosing the right specifications and materials is the top priority. Because there are many types of nose wire:
(1) Single-core disposable mask nose wire
Material: Full plastic PE
Width: 3.7MM
Wire diameter: 0.45MM (26 # iron wire), 0.50MM (25 # iron wire)
Reel: 1000M / roll

(2) Single-core disposable mask nose wire
Material: paper-plastic wire tie, paper on one side and plastic on the other
Width: 3.2MM
Wire diameter: 0.45MM (26 # iron wire), 0.50MM (25 # iron wire)
Reel: 1000M / roll
Reel weight: 2.2KGS
The main features of the product:
The iron wire is centered, the composite is firm, the wire is not exposed, the thickness is uniform,
and the setting is simple
Production per day: 15 million nose wire

Disposable masks are usually replaced every 8 hours and cannot be reused.
Instructions
Wash your hands before wearing a mask. Hold the ear straps with both hands and place the dark side on the outside (blue) and the light side on the inside (white suede). Put the side of the mask with a wire (a small piece of hard) on the nose, squeeze the wire according to your nose shape and then pull the mask body completely down so that the mask completely covers the nose.
Conditions of Use
There are various types of disposable dust masks, which must be selected according to different operating needs and working conditions. First of all, it should be selected according to the dust concentration and toxicity. According to GB / T18664 "Respiratory protective equipment selection, use and maintenance", as a half mask, all dust masks are suitable for environments where the concentration of harmful substances does not exceed 10 times the occupational exposure limit.
Otherwise, a full-face mask or a respirator with a higher protection level should be used. If the particulate matter is highly toxic, carcinogenic and radioactive, the filter material with the highest filtration efficiency should be selected. If the particulate matter is oily, be sure to select a suitable filter material. If the particulate matter is needle-shaped fiber, such as slag wool, asbestos, glass fiber, etc., it cannot be washed with water due to the dust mask.
Masks with tiny fibers attached to the face seal area are likely to cause facial irritation and are not suitable for use. For high-temperature and high-humidity environments, it is more comfortable to choose a mask with an exhalation valve. A mask that can remove ozone can be used for welding to provide additional protection. However, if the ozone concentration is higher than 10 times the occupational health standard, the mask can be replaced. Poison combination filter element.

