How Does HONGDA Teach You To Fasten And Unfasten The Tie Belt

We are professional manufacturer of twist ties in China. Main products include Nose wire for face mask,Earloops,plastic twist ties, paper twist ties, metallic twist ties, PVC twist ties, paper/plastic twist ties in pre-cut, gangs and spool forms. Established in 1998, our company exports high quality products to many countries and regions.

Tools and materials

1. twist tie

2. Small flat screwdriver

Methods and Steps

1. It's easy to buy a tie in the market, and it's cheaper. The general material is plastic. Its style is shown in the figure. So let's see, one end is pointed, one end is perforated, and one end is jagged.

  2. The first thing to distinguish positive and negative. Bend the serrated side inwards, as shown. The pointed end passes through the serial port to form an enclosure.

  3. Then you can wrap up the things you need to sort out, just pull the end of the sharp hand can be tight, not loose.

  4. Tighten is easier, it is more difficult to uncover, the general people will not solve, most of the direct use of scissors cut. This is where you need to prepare a small flat port screwdriver.

  5. Carefully observe the serial port, you will find a small anti-loose stop, stuck in the tie. That's why the tie won't come loose. We only need to use a small screwdriver to tighten the stopper and tie between the serial port, as shown in the picture. You can easily pull the ribbon out and uncover it. The tie is ready to be used again.

Matters needing attention

1. Do not reverse the direction of the binding, and pay attention to the sawtooth grain surface, otherwise it cannot be locked.

  2. The flat mouth of the flat screwdriver should be small, otherwise it cannot be pierced.